This page contains some of my favorite Heating & Air Conditioning Parts, Supplies & Tools

Hello Everyone! We Hope All of You Have A Happy, Healthful & Prosperous 2009!

I use these supplies and parts almost everyday in my HVAC business. The list will continue to grow. Please check back often.

These are low wholesale prices!

We Would Love To Have Your Business!

To purchase using PayPal, Credit Card, Visa, MasterCard, Discover or American Express, please click on the "Add to Cart" button next to each item you would like to purchase. 

PayPal It's Fast, Easy, Safe & Secure!

We Have VeriSign Secure Online Credit Card Processing!

We accept these credit cards:

Need Help Troubleshooting Your Heating & Air Conditioning Problems?

Please click here if you need help in troubleshooting your heating problem. 

Please click here if you need help in troubleshooting your air conditioning, cooling problem.

Phoenix Pro Model #379 Digital Clamp-On Multimeter Only $135.00

I have seen this meter selling for $150.00 on other sites. Everyone should have a Volt, Ohm, Amp probe, and capacitor tester if you are working with or around electricity. Yes, this meter will test capacitors! You can open the jaws of this meter, clamp the meter jaws around a wire and it will tell you how many amps the motor, compressor or part is using.  You can use this meter to troubleshoot motors, compressors and parts. Compressors and motors have a FLA (full load amp) or RLA (Running Load Amp) rating. If your motor or compressor is running over or right at these ratings then you would know that the motor or compressor is having a problem. It is a necessity to have a good meter when troubleshooting heating & air conditioning systems. I wanted to offer you a great low cost meter that does a great job in the field. I found this meter at a bargain price. Below are features and pictures.  This meter will help you stop guessing and help you determine if a part is bad. Troubleshoot your HVAC system yourself and save! Purchase this low cost digital Multi-meter for $135.00. *I would not recommend this meter if you are not educated in understanding electricity and electrical circuits.

Foil Duct Tape

 Below is a picture of my favorite duct tape. This tape will stick to just about anything! Once it is stuck it is very hard to get off. No more hanging, loose duct tape after a couple of years! It is like sticking aluminum foil on your duct work! I use it for repairs around the house too! This tape is 3" wide and 50 yards long. It really makes anything look good with its chrome finish. Even duct work! Purchase yours today for only $15.00.

                           This tape has an easy to unwrap paper backing. 

Please click here if you are interested in our EasySeal Air Conditioner Leak repair kit. We started selling this September 2009. 

Evaporator, Condensing Unit Fin Straightening Tools

Below are pictures of two of my favorite tools. Coil fin tools, or we sometimes refer to them as fin combs, are essential tools to have in every HVAC repair tool box. I use these tool almost everyday to straighten bent fins on air conditioner coils. I use this tool on outdoor condensing coils to straighten the fins back out so it does not reduce air flow through the condensing unit. Poor air flow would cause your outdoor unit to run high head pressure, thus decreasing the efficiency of your air conditioning system. It would also make your compressor run harder, use more electricity, not cool your home as well and possibly cause premature system failure. I also use this tool to clean indoor evaporator coils. If you have deep embedded dirt within the coil you can use this tool to get the dirt out.  We had lots of hail damage several years ago here in Louisville, KY. I used this tool to straighten many of the damaged fins back out to normal. Below are pictures of two types of fin tools, with an opportunity for you to purchase at a low price of $12.00. 

The Model #T-100 fin straightening tool has six interchangeable combs or heads to fit almost all air conditioning coils with fins that range from 8, 9, 10, 11, 12 & 14 fins per inch.

Supco Model FCR6 Handy Ring Fin Comb Set

The Supco Model #FCR6 fin straightening tool has 6 fin combs with two fin comb sizes on each comb. This tools gives you 12 fin comb sizes to fit almost all air conditioning coils with fins that range from 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, & 20 fins per inch.

Zoom Spout Oiler

This is my favorite zoom spout oiler. With the flexible end, it allows you to get oil into those hard to reach areas. This oiler is great to use on oiling furnace blower motors and outdoor condenser fan motors. The Zoom spout oiler may be used to oil all appliances and electric motor bearings up to 5 horsepower!  You may purchase yours today for only $2.00. Below we have pictures with an opportunity for you to purchase.

WAGNER Gallo Gun. Cleans Condensate Drain Lines With a Swoosh!

This is a great tool for clearing those stopped up Drain lines! The Gallo Gun uses CO2 Pressure to blow the drain line out! This Gun must be used with the CO2 Cartridges Sold Below. Gun does not come with CO2 Cartridges.

 12 WAGNER Gallo Gun Refill CO2  Cartridges #GGC-12

One part that I see fail many times during the winter months is the pressure switch sensor tubing. The tubing connects to the pressure switch on one end and the hot draft inducer on the other end. The draft inducer gets real hot. The sensor tube end that is attached to the draft inducer will break or crack. When this happens the pressure switch can not sense that the vent is open, so the pressure switch stays open, and you do not get any furnace ignition. You might want to look at your pressure switch tubing to make sure the end attached to the draft inducer is not cracked or brittle. If your sensor tubing does look cracked or brittle then I would suggest purchasing the tubing we have for sale below. This is probably well more than enough tubing. It is 24 inches long.

Did you find what you are looking for? Below, you may use Google to search our site or the Web:

Thanks For the Opportunity to Do Business With You!