Please Check Out Our Sale Prices!
Hello Everyone! We Hope All of You Have A Happy, Healthful
& Prosperous 2010!
We Would Love To Have Your Business!
This page contains Bryant & Carrier Furnace Ignitors
& Flame Sensors. This page also contains links to other pages on our site
that contain parts and supplies that are used on Bryant & Carrier Heating
& Air Conditioning Systems, filtering systems and humidifiers.
Customer Shipping time and Customer
Satisfaction are our Top Priorities! Same Business Day Shipping On All Orders
Received Before 12 Noon Eastern Standard Time! We ship
UPS & USPS.
Please see our shipping time page if you would like
more information about our shipping.
*We ship to the 50 United States. We do not ship to Canada.
Everything on this page is in stock and ready to ship.
You will receive a tracking number when we ship your order.
Shop
With Confidence!
We
are Square Trade & PayPal Verified Members!
We
now have VeriSign Secure
Online
Credit Card Processing and Cool Cart Shopping Cart
Service!
We
are Square Trade Members and PayPal Verified!
We have processed over 7,000 Successful PayPal Orders!
We Have Promptly Shipped Over 50,000 Orders Since 2002!
We are members of
the Better Business Bureau with an A+ Rating.
Kentucky State Masters HVAC License # M01340
Bryant Carrier Filters Links
Section:
Bryant Carrier Humidifier Parts
& Water Panels Section:
Bryant Carrier Furnace Hot Surface
Ignitors Section:
The Bryant, Carrier Ignitor
pictured below replaces most Bryant, Carrier & Trane IGN 26 ignitors. It is
Bryant Carrier Part # LH 33Z5 004 & LH33Z5 003. I called my Bryant &
Carrier supplier. My supplier said, "this ignitor is the most popular ignitor
and is used in 2,572 Bryant, Carrier furnaces." This Ignitor has a Norton 271M on the plug.
The ignitor has a block style "C" and a terminal connector
"D." The ignitor comes in a well packed box with padding.
Please note that all the ignitors we
sell are factory tested and have some burning, discoloration on the filament. Here is a picture below. Please click the "Add to Cart"
button below to purchase:
Ignitor Installation Bracket Part
#323901-701
One part that you might need....I hope you do not. I thought
that I would add this bracket to our site because I have
bent a few of the brackets installing the ignitors in the Bryant Plus 90 and
90I furnaces. Sometimes you have to bend the ignitor bracket holder back to get
the ignitor out. I have bent these before where the bracket will no longer hold
the ignitor secure enough. Below is a picture of the bracket with an opportunity
for you to purchase if you think you might need one. Thanks!
Bryant Carrier Furnace Flame Sensors
& Pilots Section:
Below we have listed our Bryant & Carrier Flame Sensors
and Pilots with an opportunity for you to purchase:
Bryant, Carrier Part #LH 680 014
Our first Bryant Carrier furnace flame sensor fits most
Bryant or Carrier 80% furnaces. The part number is LH 680 014. The wire on this
flame sensor is removable. This flame sensor has a spade connection on the end
after the wire is removed. Below are pictures with an opportunity for you to
purchase:
Above
Package label: Out of the Package:
Close up of plug in:
Bryant Carrier Part #LH 680 013
Our next Bryant Carrier furnace flame sensor fits most Bryant
or Carrier 90% furnaces. The part number is LH 680 013. Below are pictures with
an opportunity for you to purchase:
Above
Package Label:
Out of Package: Close up of plug:
Bryant & Carrier 2 & 3 Wire Pilot Burners:
The two pilots that we have listed below are found on many of
the older Bryant & Carrier Furnaces. One type has three wires coming out of
it and the other has only two wires. Sometimes the pilot becomes dirty and
inoperative. The pilot senses the heat of the pilot flame, then sends a closed
circuit signal back to the main gas valve saying that it is OK to open the main gas
valve because there is a pilot flame present. If the pilot is dirty your furnace's main gas valve will click off and
on, or may not open at all. Make sure
you have a nice blue flame. If you have a yellow flame the pilot probably needs
cleaning. I turn the gas and electricity off on the
furnace, then take compressed air to blow the dirt out of the pilot. Most
of the time this works, but sometimes you will need to remove the pilot for
cleaning. Sometimes these pilots become inoperative and you will need a new one.
Below we have pictures with an opportunity for you to purchase:
Bryant Carrier Spark Electrode Part #LH680 512
This is the Spark Electrode that attaches to the pilot burners that are sold
above:
Bryant Carrier Spark Igniter Box Part #LH33WZ510
This is the box that produces the spark for the Spark Electrode LH680512 that is
Pictured Above
Bryant Carrier Electrode Wire Part #301286-702
This is the high voltage wire that goes between the spark box, Part #LH33WZ510
and the electrode, Part #LH680512. Below we have a picture of the electrode wire
in the plastic bag with an opportunity for you to purchase. I never took the
wire out of the bag to measure but it looks to be 18 to 24 inches long.
Bryant Carrier Transformer Part #HT01BC116
The transformer
below is found on many Bryant & Carrier furnaces. This is a 40 VA transformer with a 120
volts AC primary and a 24 Volts AC secondary. Below we have pictures with an
opportunity for you to purchase:
Sorry, No Returns on Electrical,
Electronic Products Once they Have Been Installed.
Did
you find what you need? Below, you may use Google to search our site or the
Web:
Thanks
For the Opportunity to Do Business With You!
We Sell Heating, Air Conditioning Parts & Supplies To You At Low Wholesale Prices!