



![]()
EZ Flex filters have a Merv 10 Efficiency rating. While maintaining one of the lowest pressure drop ratings in the industry. They are much more effective than a standard furnace filter for removal of dust, dirt, pollen and other airborne pollutants. | |
EZ Flex filters are easy to Assemble. With the simple three step process that eliminates the need for filter support combs. The EZ Flex assemblies in less than 15 seconds. |

Maximum Versatility. With a design that fits Bryant, Carrier, Honeywell, Space-Gard, and Trion Cabinets. | |
Please click here if you would like to see installation instructions for installing the EZ Flex filters. |
![]()
![]()
Expanded Dimensions for the EXPXXFIL0016 are: 16" X 25"
![]()
Expanded Dimensions for the EXPXXFIL0020 are: 20" X 25"
![]()
Expanded Dimensions for the EXPXXFIL0024 are: 24" X 25"
![]()
![]()
![]()
![]()
![]()

Above 88NA2506MB01 filter media in the box: Above close-up of the label:
![]()
Above label off of case box: Above shows 6 filters in the case:
![]()
The G99 Air Filter Gage provides a visual indication of the need to replace air filters in forced air heating and cooling systems. The gage is installed between the blower and the air filter where a slight vacuum exists due to the air flow resistance of the air filter. Air flowing into the gage, around the calibration screw, lifts a vane in proportion to the negative pressure in the blower compartment. As the air filter loads (gets dirty) the vacuum increases, raising the vane of the gage to indicate a filter change is needed. This gage measures 2 3/16" X 2 3/16" Comes with installation instructions.

![]()
|
|||
|
![]()
![]()
![]()
We accept these credit cards:
